Dell MXG061 Service Manual Download Page 42

Page: 42 / 64

Display: Dell XPS M1710 Service Manual

file:///C|/Users/santhosh_v.ASIA-PACIFIC/Desktop/Hawke/New%20folder/display.htm[2/21/2014 11:23:47 AM]

Back to Contents Page

Display

Dell™ XPS™ M1710 Service Manual

Display Assembly

Removing the Display Assembly

CAUTION:

Before you begin the following procedure, follow the safety instructions in the

Product

Information Guide

NOTICE:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching

an unpainted metal surface (such as the back panel) on the computer.

NOTICE:

To help prevent damage to the system board, remove the main battery (see

Before Working Inside Your

Computer

) before working inside the computer.

1. Follow the instructions in

Before Working Inside Your Computer

2. Turn the computer upside down and loosen the two captive screws on the Mini-Card cover.

NOTE:

You must detach the Mini-Card antennas (see

step 3

) before you can remove the display assembly. If a Mini-

Card is installed, disconnect the antenna cables from the card. If one is not installed, detach the antenna cables from

their secured location.

3. Disconnect the antenna cables from the Mini-Card, if applicable.

Summary of Contents for MXG061

































































Search results

Summary of Contents for MXG061

Reviews:

Related manuals for MXG061

Brands by name

Popular brands

Dell MXG061, Service Manual

Search results

Summary of Contents for MXG061

Reviews:

Related manuals for MXG061

Brands by name

Popular brands