Dell MXG061 Service Manual Download Page 26

Page: 26 / 64

System Fan(s): Dell XPS M1710 Service Manual

file:///C|/Users/santhosh_v.ASIA-PACIFIC/Desktop/Hawke/New%20folder/fans.htm[2/21/2014 11:23:37 AM]

Back to Contents Page

System Fan(s)

Dell™ XPS™ M1710 Service Manual

CAUTION:

Before you begin the following procedure, follow the safety instructions in the

Product

Information Guide

NOTICE:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching

an unpainted metal surface (such as the back panel) on the computer.

NOTICE:

To help prevent damage to the system board, remove the main battery (see

Before Working Inside Your

Computer

) before working inside the computer.

1. Follow the instructions in

Before Working Inside Your Computer

2. Remove the hinge cover (see

Removing the Hinge Cover

3. Remove the keyboard (see

Keyboard

4. Remove the display assembly (see

Removing the Display Assembly

5. Remove the palm rest (see

Removing the Palm Rest

6. Remove the two M2.5 x 5-mm screws from the fan(s), and then disconnect the fan cables (one cable is the fan LED

cable) from the system board.

7. Lift the fan(s) out of the computer.

1 M2.5 x 5-mm screws (2)

2 fan for processor thermal-cooling

assembly

3 fan cables

(2)

4 connectors on system board

(2)

Summary of Contents for MXG061

































































Search results

Summary of Contents for MXG061

Reviews:

Related manuals for MXG061

Brands by name

Popular brands

Dell MXG061, Service Manual

Search results

Summary of Contents for MXG061

Reviews:

Related manuals for MXG061

Brands by name

Popular brands