Dell MXG061 Service Manual Download Page 57

Page: 57 / 64

Palm Rest: Dell XPS M1710 Service Manual

file:///C|/Users/santhosh_v.ASIA-PACIFIC/Desktop/Hawke/New%20folder/palmrest.htm[2/21/2014 11:23:53 AM]

Replacing the Palm Rest

1. Align the palm rest with the base and gently snap the palm rest into place.

2. Reconnect the touch-pad connector to the system board.

3. Reconnect the LED board connector to the system board.

4. Replace the coin-cell battery, if appropriate (see

Replacing the Coin-Cell Battery

5. Reconnect the coin-cell battery cable to the system board.

6. Replace the six M2.5 x 5-mm screws on the top side of the palm rest.

7. Turn the computer upside down, and replace the 12 M2.5 x 8-mm screws on the bottom of the computer.

8. Replace the display assembly (see

Replacing the Display Assembly

9. Replace the keyboard (see

Keyboard

10. Replace the hinge cover (see

Replacing the Hinge Cover

Back to Contents Page

Summary of Contents for MXG061

































































Search results

Summary of Contents for MXG061

Reviews:

Related manuals for MXG061

Brands by name

Popular brands

Dell MXG061, Service Manual

Search results

Summary of Contents for MXG061

Reviews:

Related manuals for MXG061

Brands by name

Popular brands