Dell MXG061 Service Manual Download Page 40

Page: 40 / 64

System Board: Dell XPS M1710 Service Manual

file:///C|/Users/santhosh_v.ASIA-PACIFIC/Desktop/Hawke/New%20folder/sysboard.htm[2/21/2014 11:23:45 AM]

system board M2.5 x 5-mm screws (4)

23. Remove the system board, slowly easing the connectors out of their access holes on the back and side of the computer

base:

a. With the back of the computer facing you, grasp the upper-right corner of the system board and lift it slightly.

b. Pull the system board assembly away from you toward the front of the computer and slightly to the right; at the

same time, use your left hand to release the audio connectors by pulling the side of the computer base slightly

to the left.

system board assembly

Replacing the System Board

1. Replace in reverse order all of the components that you removed in

Removing the System Board

NOTICE:

Before turning on the computer, replace all screws and ensure that no stray screws remain inside the

computer. Failure to do so may result in damage to the computer.

Summary of Contents for MXG061

































































Search results

Summary of Contents for MXG061

Reviews:

Related manuals for MXG061

Brands by name

Popular brands

Dell MXG061, Service Manual

Search results

Summary of Contents for MXG061

Reviews:

Related manuals for MXG061

Brands by name

Popular brands