Dell MXG061 Service Manual Download Page 33

Page: 33 / 64

Smart Card Reader: Dell XPS M1710 Service Manual

file:///C|/Users/santhosh_v.ASIA-PACIFIC/Desktop/Hawke/New%20folder/smartcar.htm[2/21/2014 11:23:42 AM]

Back to Contents Page

Smart Card Reader

Dell™ XPS™ M1710 Service Manual

CAUTION:

Before you begin the following procedure, follow the safety instructions in the

Product

Information Guide

NOTICE:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching

an unpainted metal surface (such as the back panel) on the computer.

NOTICE:

To help prevent damage to the system board, remove the main battery (see

Before Working Inside Your

Computer

) before working inside the computer.

1. Follow the instructions in

Before Working Inside Your Computer

2. Remove the optical drive (see

Optical Drive

3. Remove the hinge cover (see

Removing the Hinge Cover

4. Remove the display assembly (see

Removing the Display Assembly

5. Remove the keyboard (see

Keyboard

6. Remove the palm rest (see

Palm Rest

7. Remove the smart-card reader screw.

8. Disconnect the smart-card reader connector from the system board:

a. Lift up on the connector latch.

b. Lift the cable out of the connector.

9. To remove the smart card reader, pry up the reader by the metal screw plate and pull up and out from underneath the

side tabs.

1 side tabs (2)

2 smart card

reader

3 smart-card reader

screw

4 smart-card reader connector on system

board

Summary of Contents for MXG061

































































Search results

Summary of Contents for MXG061

Reviews:

Related manuals for MXG061

Brands by name

Popular brands

Dell MXG061, Service Manual

Search results

Summary of Contents for MXG061

Reviews:

Related manuals for MXG061

Brands by name

Popular brands