Back to Contents Page
System Board
Dell™ Latitude™ X1 Service Manual
Removing the System Board
The system board's BIOS chip contains the Service Tag, which is also visible on a barcode label on the bottom of the computer. The replacement kit for the
system board includes a CD that provides a utility for transferring the Service Tag to the replacement system board.
1.
Follow the instructions in "
Preparing to Work Inside the Computer
."
2.
Remove the
keyboard
.
3.
Remove the
display assembly
.
4.
Remove the
memory module
.
5.
Remove the
hard drive
.
6.
Remove the
thermal-cooling assembly
.
7.
Remove the
palm rest
.
8.
Remove the
Mini PCI card
.
9.
Remove the
modem
.
10.
Disconnect the
speaker
from the system board.
11.
Disconnect the
internal card with Bluetooth wireless technology
from the system board.
12.
Disconnect the power button cable from the system board.
CAUTION:
Before performing the following procedures, read the safety instructions in your
Product Information Guide
.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE:
Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries.
Summary of Contents for Latitude X1
Page 11: ...Back to Contents Page 1 M2 x 3 mm screws 4 2 thermal cooling assembly ...
Page 21: ......
Page 23: ...Back to Contents Page ...
Page 27: ...Back to Contents Page ...
