11.
Use a #0 Phillips screwdriver to remove the four M2 x 3-mm CH screws from the display panel brackets on the sides.
12.
Remove the tape that holds the display cable to the back of the display panel.
13.
Pull the display cable connector away from the cable connector on the back of the display panel.
1 M2 x 4-mm screws (8)
2 captive display-cable
ground screw
3 display panel
1 display panel brackets (2)
2 M2 x 3-mm CH screws (4)
Summary of Contents for Latitude X1
Page 11: ...Back to Contents Page 1 M2 x 3 mm screws 4 2 thermal cooling assembly ...
Page 21: ......
Page 23: ...Back to Contents Page ...
Page 27: ...Back to Contents Page ...
