Back to Contents Page
Secure Digital Card Reader
Dell™ Latitude™ X1 Service Manual
1.
Follow the instructions in "
Preparing to Work Inside the Computer
."
2.
Remove the
system board
.
3.
Remove the two M2 x 3-mm screws that secure the secure digital card reader to the base and the system board.
4.
Lift the secure digital card reader straight up and disengage it from the system board connector.
Back to Contents Page
CAUTION:
Before performing the following procedures, read the safety instructions in your
Product Information Guide
.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
1 M2 x 3-mm screw
2 secure digital card reader
3 M2 x 3-mm screw
4 system board connector
Summary of Contents for Latitude X1
Page 11: ...Back to Contents Page 1 M2 x 3 mm screws 4 2 thermal cooling assembly ...
Page 21: ......
Page 23: ...Back to Contents Page ...
Page 27: ...Back to Contents Page ...
