Back to Contents Page
Power Button
Dell™ Latitude™ X1 Service Manual
1.
Follow the instructions in "
Preparing to Work Inside the Computer
."
2.
Turn the computer over and remove the six M2.5 x 5-mm screws that are not labeled.
3.
Remove the
keyboard
.
4.
Remove the
display assembly
.
5.
Remove the
memory shield
.
6.
Remove the
hard drive
.
7.
Remove the
thermal-cooling assembly
.
8.
Remove the
palm rest
.
9.
Disconnect the power button cable from the system board.
10.
Remove the M2 x 3-mm screw securing the power button to the system board.
11.
Lift the power button straight out of the base.
Back to Contents Page
CAUTION:
Before performing the following procedures, read the safety instructions in your
Product Information Guide
.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
1
M2 x 3-mm screw
2
power button
Summary of Contents for Latitude X1
Page 11: ...Back to Contents Page 1 M2 x 3 mm screws 4 2 thermal cooling assembly ...
Page 21: ......
Page 23: ...Back to Contents Page ...
Page 27: ...Back to Contents Page ...
