Back to Contents Page
Keyboard
Dell™ Latitude™ X1 Service Manual
1.
Follow the instructions in "
Preparing to Work Inside the Computer
."
2.
Close the display and turn the computer upside down on a flat work surface.
3.
Remove the seven M2.5 x 5-mm screws labeled "K" from the bottom of the computer.
4.
Turn the computer top-side up and open it.
5.
Remove the keyboard:
a.
Lift the keyboard from the front (near the touch pad) approximately 45 degrees.
b.
Disconnect the keyboard cable from the system board by using a plastic scribe to disengage the two system-board connector tabs.
c.
Pull the keyboard away from the computer.
CAUTION:
Before performing the following procedures, read the safety instructions in your
Product Information Guide
.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
1 keyboard cable
2 system-board connector
tabs
Summary of Contents for Latitude X1
Page 11: ...Back to Contents Page 1 M2 x 3 mm screws 4 2 thermal cooling assembly ...
Page 21: ......
Page 23: ...Back to Contents Page ...
Page 27: ...Back to Contents Page ...
