Dell Latitude 5490 Service Manual Download | Manualshive

Page: 95 / 105

background image

Table 13. System setup options—Update, Recovery menu

Update, Recovery

UEFI Capsule Firmware Updates

Enable or disable BIOS updates through UEFI capsule update packages.

By default, the option is enabled.

BIOS Recovery from Hard Drive

Enables the user to recover from certain corrupted BIOS conditions from a
recovery file on the user primary hard drive or an external USB key.

By default, the option is enabled.

BIOS Downgrade

Allow BIOS Downgrade

Enable or disable the flashing of the computer firmware to previous revision is
blocked.

By default, the option is enabled.

SupportAssist OS Recovery

Enable or disable the boot flow for SupportAssist OS Recovery tool in the
event of certain computer errors.

By default, the option is enabled.

BIOSConnect

Enable or disable cloud Service OS recovery if the main operating system fails
to boot with the number of failures equal to or greater than the value specified
by the Auto OS Recovery Threshold setup option and local Service OS does not
boot or is not installed.

By default, the option is enabled.

Dell Auto OS Recovery Threshold

Controls the automatic boot flow for SupportAssist System Resolution Console
and for Dell OS Recovery Tool.

By default, the threshold value is set to 2.

Table 14. System setup options—System Management menu

System Management

Service Tag

Display the Service Tag of the computer.

Asset Tag

Create a computer Asset Tag.

Wake on LAN/WLAN

Enable or disable the computer to power on by special LAN signals when it
receives a wakeup signal from the WLAN.

By default, the

Disabled

option is selected.

Auto on Time

Enable to set the computer to turn on automatically every day or on a
preselected date and time. This option can be configured only if the Auto On
Time is set to Everyday, Weekdays, or Selected Days.

By default, the option is disabled.

Intel AMT Capability

Enable Intel AMT Capability

Enable or disable the Intel AMT capabilty.

By default, the

Restrict MEBx Access

option is enabled.

MEBx Hotkey

Enable or disable MEBx hotkey.

By default, the option is disabled.

USB Provision

Enable USB Provision

Enable or disable the Intel AMT provisioning using the local provisioning file
through a USB storage device.

By default, the option is disabled.

SERR Messages

Enable or disable SERR messages.

By default, the option is enabled.

System setup

95

«
...
93
94
95
96
97
...
»

Summary of Contents for Latitude 5490










































































































Reviews:

No comments

Related manuals for Latitude 5490

Aspire 1670 Series

Brand: Acer Pages: 118

Brand: Acer Pages: 94

AcerNote Nuovo 970

Brand: Acer Pages: 4

Brand: Acer Pages: 16

9410-2829 - Aspire

Brand: Acer Pages: 108

Brand: Acer Pages: 130

Brand: Acer Pages: 93

Aspire 1360 Series

Brand: Acer Pages: 104

scieneo. amplio VI

Brand: Dynatech Pages: 52

Brand: Medion Pages: 100

Joybook Lite T132

Brand: BenQ Pages: 68

Toughbook CF-50Y8KNUDM

Brand: Panasonic Pages: 40

CHROMEBOOK C204EE

Brand: Asus Pages: 94

Brand: Asus Pages: 71

AMILO Pro V2040

Brand: Fujitsu Pages: 38

Brand: Fujitsu Pages: 85

Brand: Fujitsu Pages: 89

A1130 - Lifebook T6500 4GB 500GB

Brand: Fujitsu Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands