Dell Latitude 5490 Service Manual Download | Manualshive

Page: 98 / 105

background image

5. In the

Category

drop-down list, select

BIOS

.

6. Select the latest version of BIOS, and click

Download

to download the BIOS file for your computer.

7. After the download is complete, browse the folder where you saved the BIOS update file.
8. Double-click the BIOS update file icon and follow the on-screen instructions.

For more information, see knowledge base article

at

www.dell.com/support

.

Updating the BIOS in Linux and Ubuntu

To update the system BIOS on a computer that is installed with Linux or Ubuntu, see the knowledge base article

at

www.dell.com/support

Updating the BIOS using the USB drive in Windows

About this task

CAUTION:

If BitLocker is not suspended before updating the BIOS, the next time you reboot the system it

will not recognize the BitLocker key. You will then be prompted to enter the recovery key to progress and the
system will ask for this on each reboot. If the recovery key is not known this can result in data loss or an
unnecessary operating system re-install. For more information on this subject, see Knowledge Article:

www.dell.com/support/article/sln153694

Steps

1. Follow the procedure from step 1 to step 6 in

Updating the BIOS in Windows

to download the latest BIOS setup program file.

2. Create a bootable USB drive. For more information, see the knowledge base article

at

www.dell.com/support

.

3. Copy the BIOS setup program file to the bootable USB drive.
4. Connect the bootable USB drive to the computer that needs the BIOS update.
5. Restart the computer and press

F12

.

6. Select the USB drive from the

One Time Boot Menu

.

7. Type the BIOS setup program filename and press

Enter

.

The

BIOS Update Utility

appears.

8. Follow the on-screen instructions to complete the BIOS update.

Updating the BIOS from the F12 One-Time boot menu

Update your computer BIOS using the BIOS update.exe file that is copied to a FAT32 USB drive and booting from the F12
One-Time boot menu.

About this task

CAUTION:

If BitLocker is not suspended before updating the BIOS, the next time you reboot the system it

will not recognize the BitLocker key. You will then be prompted to enter the recovery key to progress and the
system will ask for this on each reboot. If the recovery key is not known this can result in data loss or an
unnecessary operating system re-install. For more information on this subject, see Knowledge Article:

www.dell.com/support/article/sln153694

BIOS Update

You can run the BIOS update file from Windows using a bootable USB drive or you can also update the BIOS from the F12
One-Time boot menu on the computer.

Most of the Dell computers built after 2012 have this capability, and you can confirm by booting your computer to the F12
One-Time Boot Menu to see if BIOS FLASH UPDATE is listed as a boot option for your computer. If the option is listed, then the
BIOS supports this BIOS update option.

NOTE:

Only computers with BIOS Flash Update option in the F12 One-Time boot menu can use this function.

98

System setup

«
...
96
97
98
99
100
...
»

Summary of Contents for Latitude 5490










































































































Reviews:

No comments

Related manuals for Latitude 5490

M190S World Warrior

Brand: EUROCOM Pages: 149

Brand: Clevo Pages: 99

Brand: Barbie Pages: 45

TravelMate P273-M

Brand: Acer Pages: 85

TravelMate P645-S

Brand: Acer Pages: 99

TravelMate 6252

Brand: Acer Pages: 100

TravelMate 250P series

Brand: Acer Pages: 100

Brand: Acer Pages: 15

BRnR 4000 4005WLMi

Brand: Acer Pages: 39

Brand: Acer Pages: 95

Brand: Acer Pages: 90

Brand: Acer Pages: 106

Aspire TimelineX 3820

Brand: Acer Pages: 313

Brand: Acer Pages: 81

Brand: Krüger & Matz Pages: 25

Brand: Asus Pages: 14

Brand: Asus Pages: 24

Eee PC Meego X101

Brand: Asus Pages: 46

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands