Dell Latitude 5490 Service Manual Download

Page: 90 / 105

Table 4. System setup options—System information menu (continued)

Overview

Memory Information

Memory Installed

Displays the total computer memory installed.

Memory Available

Displays the total computer memory available.

Memory Speed

Displays the memory speed.

Memory Channel Mode

Displays single or dual channel mode.

Memory Technology

Displays the technology used for the memory.

DIMM_SLOT 1

Displays the DIMM 1 memory size.

DIMM_SLOT 2

Displays the DIMM 2 memory size.

Devices Information

Panel Type

Displays the Panel Type of the computer.

Video Controller

Displays the video controller type of the computer.

Video Memory

Displays the video memory information of the computer.

Wi-Fi Device

Displays the wireless device information of the computer.

Native Resolution

Displays the native resolution of the computer.

Video BIOS Version

Displays the video BIOS version of the computer.

Audio Controller

Displays the audio controller information of the computer.

Bluetooth Device

Displays the Bluetooth device information of the computer.

LOM MAC Address

Displays the LAN On Motherboard (LOM) MAC address of the computer.

Slot 1

Displays the M.2 network information of the computer

SATA 0

Displays the SATA hard drive information of the computer.

Slot 2_M.2

Displays the M.2 PCIe SSD information of the computer.

Slot 3_M.2

Displays the M.2 PCIe SSD information of the computer.

Table 5. System setup options—Boot Configuration menu

Boot Configuration

Boot Sequence

Boot mode

Displays the boot mode.

Boot Sequence

Displays the boot sequence.

Secure Digital (SD) Card Boot

Enable or disable the SD card read-only boot.

By default, the

Secure Digital (SD) Card Boot

option is not enabled.

Secure Boot

Enable Secure Boot

Enable or disable the secure boot feature.

By default, the option is not enabled.

Secure Boot Mode

Enable or disable to change the secure boot mode options.

By default, the

Deployed Mode

is enabled.

Expert Key Management

Enable Custom Mode

Enable or disable custom mode.

By default, the

custom mode

option is not enabled.

Custom Mode Key Management

Select the custom values for expert key management.

System setup

Summary of Contents for Latitude 5490










































































































Search results

Summary of Contents for Latitude 5490

Reviews:

Related manuals for Latitude 5490

Brands by name

Popular brands

Dell Latitude 5490, Service Manual

Search results

Summary of Contents for Latitude 5490

Reviews:

Related manuals for Latitude 5490

Brands by name

Popular brands