Dell Latitude 5320 Service Manual Download Page 12

Page: 12 / 116

Removing and installing components

NOTE:

The images in this document may differ from your computer depending on the configuration you ordered.

Topics:

•

Recommended tools

•

Screw list

•

Major components of your system

•

•

•

•

•

•

•

•

Solid-state drive

•

•

•

•

•

Power button with fingerprint reader (optional)

•

•

•

•

•

Display back cover assembly

•

•

•

•

•

Smart card reader

•

Keyboard

•

SIM card slot filler

•

Palm-rest and keyboard assembly

Recommended tools

The procedures in this document may require the following tools:

●

Phillips #0 screwdriver

●

Plastic scribe

NOTE:

The #0 screw driver is for screws 0-1, and the #1 screw driver is for screws 2-4.

Screw list

NOTE:

When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and

then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.

Removing and installing components

Summary of Contents for Latitude 5320





















































































































Search results

Summary of Contents for Latitude 5320

Reviews:

Dell Latitude 5320, Service Manual, Page: 12 / 116

Search results

Summary of Contents for Latitude 5320

Reviews: