Dell Latitude 5320, Service Manual

Page: 31 / 116

Steps
1. Align the notch on the WWAN card and slide the WWAN card at an angle into the WWAN-card slot.
2. Connect the antenna cables to the connectors on the WWAN card.
3. Align and place the WWAN-card bracket on the system board and WWAN card, and tighten the single (M2x3) screw.
Next steps
1. Install the base cover .
2. Connect the AC adapter and power on the system.
3. Follow the procedure in
After working on your computer .
Solid-state drive
Removing the M.2 2280 solid-state drive
Prerequisites
1. Follow the procedure in before working inside your computer .
2. Remove the base cover .
3. Enter service mode .
Removing and installing components 31