manualshive.com logo in svg

Dell Inspiron XPS, Manual, Page: 144 / 186

Share
Download
Dell Inspiron XPS Manual Download Page 144

144

Appendix

www

.dell.com | support.dell.com

Memory

Memory module connector

dual-channel DDR, two user-accessible 
DDR SODIMM connectors, single 
SODIMM per channel

Memory module capacities

128 MB, 256 MB, 512 MB, and 1024 MB

Memory type

PC3200

Memory configuration support

dual-channel only

NOTE: 

To get dual-channel memory 

bandwidth capability, both the connectors 
must contain memory modules and they must 
be of the same size and configuration.

Minimum memory

256 MB

Maximum memory

2048 MB

Ports and Connectors

Video

15-hole connector

Digital-video interface (DVI-I)

one 24-hole connector

Audio

microphone miniconnector, stereo 
headphone/speakers miniconnector; S/PDIF 
connector

USB

three 4-pin USB 2.0-compliant connectors

D/Bay (powered USB) connector

4-pin power supply

IEEE 1394

4-pin mini, nonpowered connector

Infrared

sensor compatible with IrDA Standard 1.1 
(Fast IR)

S-video TV-out

7-pin mini-DIN connector (optional S-video 
to composite video adapter cable)

Mini PCI

Type IIIA Mini PCI card slot

Modem

RJ-11 port

Network adapter

RJ-45 port

Communications

Modem:

Type

v.92 56K MDC

Controller

softmodem

Interface

internal AC’97 bus

Summary of Contents for Inspiron XPS



























































































































































































Reviews:

No comments