Dell Inspiron XPS Manual Download Page 124

Page: 124 / 186

124

Adding and Replacing Parts

www

.dell.com | support.dell.com

Display

CAUTION:

Before you begin this procedure, read the safety instructions at the front of this document

(see page 11).

NOTICE:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by

periodically touching a connector on the back panel of the computer.

NOTICE:

To avoid damaging the system board, you must remove the main battery before you begin

working inside the computer.

Follow the procedures in "Before You Begin" (see page 103).

NOTICE:

Before turning the computer over and removing the screws, ensure that the display is firmly

latched closed.

Turn the computer over and remove the four screws (two on each side) labeled "D" on the
bottom of the computer.

Turn the computer right-side up.

Remove the left, right, and center hinge covers (see page 121).

Disconnect the antenna cables (pull to separate the connectors).

screws
labeled "D" (4)

Summary of Contents for Inspiron XPS



























































































































































































Search results

Summary of Contents for Inspiron XPS

Reviews:

Related manuals for Inspiron XPS

Brands by name

Popular brands

Dell Inspiron XPS, Manual

Search results

Summary of Contents for Inspiron XPS

Reviews:

Related manuals for Inspiron XPS

Brands by name

Popular brands