Dell Inspiron 8200 Page 79 Manual Download

Page: 79 / 164

Power Management: Dell Inspiron 8200

Back to Contents Page

Power Management

Dell™ Inspiron™ 8200

Management Tips

Power Management Modes

Power Options Properties

Management Tips

●

Connect the Dell™ computer to an electrical outlet when possible because the

battery life expectancy is largely determined by the number of times the battery

is charged.

●

Place the computer in

standby mode

hibernate mode

when you leave the

computer unattended for long periods of time.

●

To exit a power management mode, press the power button.

Power Management Modes

Standby Mode

Standby mode conserves power by turning off the display and the hard drive after a

predetermined period of inactivity (a time-out). When the computer exits standby

mode, it returns to the same operating state it was in before entering standby mode.

NOTICE:

If your computer loses AC and battery power while in standby mode,

it may lose data.

file:///F|/Service%20Manuals/Dell/Inspiron/8200/power.htm (1 of 5) [2/28/2004 7:40:19 AM]

Summary of Contents for Inspiron 8200





































































































































































Search results

Summary of Contents for Inspiron 8200

Reviews:

Related manuals for Inspiron 8200

Brands by name

Popular brands

Dell Inspiron 8200, Manual

Search results

Summary of Contents for Inspiron 8200

Reviews:

Related manuals for Inspiron 8200

Brands by name

Popular brands