Dell Inspiron 8200 Manual Download

Page: 146 / 164

Reserve Battery: Dell Inspiron 8200

NOTICE:

The reserve battery provides power to the computer's RTC and

NVRAM when the computer is turned off. Removing the battery causes the

computer to lose the date and time information as well as all user-specified

parameters in NVRAM. If possible, copy the information before you remove the

reserve battery.

Removing the Reserve Battery

1. Follow the instructions in "

Preparing to Work Inside the Computer

2. Remove the

keyboard

3. Remove the

hinge cover

4. Remove the

display assembly

5. Remove the

palm rest

6. On the underside of the palm rest, disconnect the palm-rest flex cable from the

ZIF connector.

file:///F|/Service%20Manuals/Dell/Inspiron/8200/resbatt.htm (2 of 3) [2/28/2004 7:40:56 AM]

Summary of Contents for Inspiron 8200





































































































































































Search results

Summary of Contents for Inspiron 8200

Reviews:

Related manuals for Inspiron 8200

Brands by name

Popular brands

Dell Inspiron 8200, Manual

Search results

Summary of Contents for Inspiron 8200

Reviews:

Related manuals for Inspiron 8200

Brands by name

Popular brands