Dell Inspiron 8200 Page 36 Manual Download

Page: 36 / 164

Solving Problems: Dell Inspiron 8200

Try another floppy disk—

Insert another disk to eliminate the possibility

that the original disk is defective.

Reinstall the drive

1. Save and close any open files, exit any open programs, and shut

down the computer.

If the drive is installed in the module bay

, remove the drive.

If the drive is a fixed drive

, review "

Check the drive for errors

3. Reinstall the drive.

4. Turn on the computer.

Clean the drive—

See "Cleaning Your Computer" in the

Tell Me How

help

file for instructions. To access the help file, see "

Accessing Help

If you cannot play a CD, CD-RW, or DVD

HINT:

Because of different worldwide file types, not all DVD titles work in all

DVD drives.

High-speed CD drive vibration is normal and may cause noise. This noise does not

indicate a defect with the drive or the CD.

file:///F|/Service%20Manuals/Dell/Inspiron/8200/solving.htm (16 of 26) [2/28/2004 7:40:15 AM]

Summary of Contents for Inspiron 8200





































































































































































Search results

Summary of Contents for Inspiron 8200

Reviews:

Related manuals for Inspiron 8200

Brands by name

Popular brands

Dell Inspiron 8200, Manual

Search results

Summary of Contents for Inspiron 8200

Reviews:

Related manuals for Inspiron 8200

Brands by name

Popular brands