Dell Inspiron 8200 Page 106 Manual Download

Page: 106 / 164

Hard Drive and Fixed Optical Drive: Dell Inspiron 8200

Back to Contents Page

Hard Drive and Fixed Optical Drive

Dell™ Inspiron™ 8200

Hard Drive

Fixed Optical Drive

NOTICE:

Only a certified service technician should perform repairs on your

computer. Damage due to servicing that is not authorized by Dell is not covered

by your warranty.

Hard Drive

NOTICE:

Disconnect the computer and attached devices from the electrical

outlet and remove any installed batteries.

NOTICE:

To avoid ESD, ground yourself by using a wrist grounding strap or by

periodically touching unpainted metal on the computer.

NOTICE:

The hard drive is very sensitive to shock. Handle the drive by its

edges (do not squeeze the top of the case), and avoid dropping it.

file:///F|/Service%20Manuals/Dell/Inspiron/8200/hdd.htm (1 of 4) [2/28/2004 7:40:49 AM]

Summary of Contents for Inspiron 8200





































































































































































Search results

Summary of Contents for Inspiron 8200

Reviews:

Related manuals for Inspiron 8200

Brands by name

Popular brands

Dell Inspiron 8200, Manual

Search results

Summary of Contents for Inspiron 8200

Reviews:

Related manuals for Inspiron 8200

Brands by name

Popular brands