1. Install the
2. Install the
.
3. Install the
4. Install the
5. Install the
6. Install the
.
7. Install the
.
8. Follow the procedure
after working inside your computer
.
System board
Removing the system board
before working inside your computer
.
2. Remove the
.
3. Remove the
.
4. Remove the
.
5. Remove the
.
6. Remove the
.
7. Remove the
.
8. Remove the
9. Remove the
.
NOTE:
System board can be removed with heatsink assembly installed, this simplifies the procedure in an event of power
button, keyboard and palmrest assembly replacements.
1. Remove the single (M2x4) screw on the metal bracket over the display cable connector on the system board [1]
2. Lift and remove the metal bracket [2] to disconnect the display cable from the system board [3].
Removing and installing components
69
Summary of Contents for Inspiron 7400
Page 19: ...4 Lift and remove the base cover from the computer Removing and installing components 19 ...
Page 60: ...3 Route the antennae and display cable along the hinges 60 Removing and installing components ...
Page 82: ...Figure 3 Power button board without FPR 82 Removing and installing components ...
Page 84: ...Figure 5 Power button board without FPR 84 Removing and installing components ...
