1. Install the
.
2. Install the
.
3. Follow the procedure
after working inside your computer
.
Heatsink
Removing the heatsink fan assembly
before working inside your computer
.
2. Remove the
.
3. Remove the
.
4. Remove the
1.
NOTE:
Heatsink and Fan are separately orderable parts.
Disconnect the fan cable from the connector on the system board [1].
2. Remove the two (M2x3) screws in sequence (2 > 1) on the fan case and four (M2x3) screws in sequence (4 > 3 > 2 > 1)
from the heatsink [2].
3. Lift and remove the heatsink fan assembly from the computer [3].
36
Removing and installing components
Summary of Contents for Inspiron 7400
Page 19: ...4 Lift and remove the base cover from the computer Removing and installing components 19 ...
Page 60: ...3 Route the antennae and display cable along the hinges 60 Removing and installing components ...
Page 82: ...Figure 3 Power button board without FPR 82 Removing and installing components ...
Page 84: ...Figure 5 Power button board without FPR 84 Removing and installing components ...
