manualshive.com logo in svg

Dell Inspiron 5590, Owner'S Manual

Share
Download
Dell Inspiron 5590 Owner'S Manual Download Page 88

Performance screen options

Option

Description

Multi Core Support

This field specifies whether the process has one or all cores enabled. The performance of some applications 
improves with the additional cores.

•

All (By default enabled)

•

1

•

2

•

3

Intel SpeedStep

Allows you to enable or disable the Intel SpeedStep feature.

•

Enable Intel SpeedStep

Default setting: The option is enabled.

C-States Control

Allows you to enable or disable the additional processor sleep states.

•

C states

Default setting: The option is enabled.

Intel TurboBoost

Allows you to enable or disable the Intel TurboBoost mode of the processor.

•

Enable Intel TurboBoost

Default setting: The option is enabled.

Power Management screen options

Option

Description

AC Behavior

Allows you to enable or disable the computer from turning on automatically when an AC adapter is connected.
Default setting: Wake on AC is not selected.

Auto On Time

Allows you to set the time at which the computer must turn on automatically. The options are:

•

Disabled

•

Every Day

•

Weekdays

•

Select Days

Default setting: Disabled

USB Wake Support

Allows you to enable USB devices to wake the system from Standby.

NOTE: 

This feature is only functional when the AC power adapter is connected. If the AC power adapter 

is removed during Standby, the system setup removes power from all the USB ports to conserve battery 
power.

•

Enable USB Wake Support

•

Wake on Dell USB-C Dock (By default enable)

88

System setup options

Summary of Contents for Inspiron 5590




































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands