Installing the display assembly
1
Place the display assembly to align with the screw holders on the laptop.
2
Tighten the M2.0x5.0 screws to secure the display assembly to the laptop.
3
Turn over the laptop.
4
Route the display cable through the routing channel and route the antenna cables by pushing it through the hole.
5
Connect the antenna cables and display cable to the connectors.
6
Place the display cable bracket over the connector and tighten the M2.0x5.0 screws to secure the display cable to the laptop.
7
Install the:
a
b
c
d
e
8
Follow the procedure in
After working inside your computer
.
Display bezel
Removing display bezel
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
b
c
d
e
3
To remove the display bezel:
a Pry the display bezel at the base of the display [1].
b Lift the display bezel to release it [2].
c Pry the edges on the side of the display to release the display bezel [3, 4,5].
CAUTION:
The adhesive used on the LCD bezel to seal it with the LCD itself, makes it hard to remove the bezel as the
adhesive is very strong and tends to stay stuck to the LCD portion and can peel the layers up or crack the glass when
trying to pry the two items apart.
Removing and installing components
47
