manualshive.com logo in svg

Dell Inspiron 5590, Owner'S Manual

Share
Download
Dell Inspiron 5590 Owner'S Manual Download Page 74

Feature

Specification

Speed

•

2400 MHz non ECC for 8th Gen processors

•

2133 MHz non ECC for 7th Gen processors

Minimum memory

4 GB

Maximum memory

32 GB

Storage specifications

Feature

Specification

SSD M.2 2280 / 
M.S 2230 / PCIe 
NVMe

up to 512GB, OPAL SED options /up to 1TB, OPAL SED options /PCIe x2 NVMe

HDD

up to 1TB, Hybrid, OPAL SED options

Audio specifications

Feature

Specification

Types

High-definition audio

Controller

Realtek ALC3246

Stereo conversion

Digital audio-out through HDMI — up to 7.1 compressed and uncompressed audio

Internal interface

High-definition audio codec

External interface

Stereo headset/mic combo

Speakers

2

Internal speaker 
amplifier

2 W (RMS) per channel

Volume controls

Hot keys

Video specifications

Feature

Specification

Type

Integrated on system board, hardware accelerated

Graphic cards

Intel® HD Graphics 620 (Integrated in Intel 7th core processors)

Intel® UHD Graphics 620 (Integrated in Intel 8th core processors)

NVIDIA GeForce® MX130, 2GB GDDR5

Data bus

Integrated video

External display 
support

•

19-pin HDMI connector

74

System specifications

Summary of Contents for Inspiron 5590




































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands