Installing hard drive
1
Insert the hard drive into the slot on the system.
2
Replace the screws to secure the hard drive to the system.
3
Replace the hard drive cable.
4
Replace the screws to secure the hard drive assembly to the system.
5
Connect the hard drive cable to the connector on the system board.
6
If you have not removed the battery, you must connect the battery cable to the system board.
7
Install the
.
8
Follow the procedures in
After working inside your system
WLAN card
Removing the WLAN card
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
b
3
To remove the WLAN card:
a Remove the M2.0x3.0 screw (1) that secures the WLAN card to the laptop [1].
b Lift the metal bracket that secures the WLAN cables to the WLAN card [2].
c Disconnect the WLAN cables from the connectors on the WLAN card [3].
NOTE:
The WLAN card is held in place with an adhesive foam spacer.
d Pull the WLAN card to release it from the connector on the system board[4].
NOTE:
Ensure NOT to pull the WLAN card more than 35°, to avoid pin damage.
Removing and installing components
19
