NOTE:
Do not press hard or touch the screen with your fingers or you may leave oily prints and smears.
NOTE:
Do not leave any liquid on the screen.
5
Remove all excess moisture as it may damage your screen.
6
Let the display dry thoroughly before you turn it on.
7
For stains that are hard to remove, repeat this procedure till the display is clean.
Using touch screen in Windows 10
Follow these steps to enable or disable the touch screen:
1
Right click on the Start menu.
2
Select
Control Panel
.
3
Tap
Pen and Input Devices
in the
Control Panel
.
4
Tap the
Touch
tab.
5
Select
Use your finger as an input device
to enable the touch screen. Clear the box to disable the touch screen.
Connecting to external display devices
Follow these steps to connect your laptop to an external display device:
1
Ensure that the external display device is turned on and plug the external display device cable into a video port on your laptop.
2
Press the Windows logo+P key.
3
Select one of the following modes:
•
PC screen only
•
Duplicate
•
Extend
•
Second Screen only
NOTE:
For more information, see the document that shipped with your display device.
Hard drive options
This laptop supports HDD, M.2 SATA SSD, and M.2 PCIe NVMe.
Identifying the hard drive in Windows 10
1
Right click on Start menu
2
Select
Device Manager
, and expand
Disk drives
.
The hard drive is listed under
Disk drives
.
Identifying the hard drive in the BIOS
1
Turn on or restart your system.
2
When the Dell logo appears, perform the following action to enter the BIOS setup program:
•
With keyboard — Tap F2 until the Entering BIOS setup message appears. To enter the Boot selection menu, tap F12.
Technology and components
65
