Installing the keyboard
1
Hold the keyboard and route the keyboard cable and the keyboard backlight cable through the palmrest in the system.
2
Align the keyboard with the screw holders on the system.
3
Replace the M2*2 screws (6) to secure the keyboard to the system.
4
Turn the system and connect the keyboard cable and the keyboard backlight cable to the connector in the system.
5
If you have not removed the battery, you must connect the battery cable to the system board.
6
Install the:
a
b
c
7
Follow the procedure in
After working inside your computer
.
Installing the keyboard trim
1
Align the keyboard trim with the tabs on the computer and press the keyboard until the keyboard clicks into place.
2
Follow the procedure in
After working inside your system
Heat sink
Removing the heat sink
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
b
3
To remove the heat sink :
a Remove the M2.0x3.0 screws (4) that secures the heat sink to the system board [1].
NOTE:
Remove the screws that secure the heat sink sink .
b Lift the heat sink away from the system board [2].
Removing and installing components
27
