manualshive.com logo in svg

Dell INSPIRON 531s Series, Owner'S Manual

Share
Download
Dell INSPIRON 531s Series Owner'S Manual Download Page 120

120

Removing and Installing Parts

12

Connect any cables that should be attached to the card.

See the documentation for the card for information about the card’s cable 
connections.

 

NOTICE: 

Do not route card cables over or behind the cards. Cables routed over the 

cards can prevent the computer cover from closing properly or cause damage to 
the equipment.

 

NOTICE: 

To connect a network cable, first plug the cable into the network device 

and then plug it into the computer.

13

Replace the computer cover, reconnect the computer and devices to 
electrical outlets, and then turn them on.

1

PCI card slot

2

PCI card

3

card retention bracket

4

card retention release lever

2

1

3

4

book.book  Page 120  Wednesday, April 16, 2008  3:33 PM

Summary of Contents for INSPIRON 531s Series





















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands