Steps
1. Align the screw holes on the heat sink with the screw holes on the system board and the display-assembly base.
2. In sequential order (1>2>3>4>5), tighten the five captive screws (M2x3) that secure the heat sink to the system board and
display-assembly base.
Next steps
1. Install the
2. Install the
3. Install the
.
4. Install the
.
After working inside your computer
.
Media-card reader
Removing the media-card reader
Prerequisites
Before working inside your computer
.
2. Remove the
.
3. Remove the
.
4. Remove the
.
5. Remove the
.
About this task
The following image indicates the location of the media-card reader and provides a visual representation of the removal
procedure.
Removing and installing components
43
