Dell Inspiron 27 7710 All-in-One, Service Manual

Page: 37 / 85

Steps
1. Align the screw holes on the fan with the screw holes on the display-assembly base.
2. Replace the three screws (M2x2.5) that secure the fan to the display-assembly base.
3. Route the fan cable through the routing guide on the display-assembly base.
4. Connect the fan cable to the system board.
Next steps
1. Install the system-board shield .
2. Install the I/O cover .
3. Install the back cover .
4. Install the stand .
5. Follow the procedure in After working inside your computer .
Speakers
Removing the speakers
Prerequisites
1. Follow the procedure in Before working inside your computer .
2. Remove the stand .
3. Remove the back cover .
4. Remove the I/O cover .
5. Remove the system-board shield .
About this task
The following image indicates the location of the speakers and provides a visual representation of the removal procedure.
Removing and installing components 37