25. Retractable camera assembly
Dell provides a list of components and their part numbers for the original system configuration purchased. These parts are
available according to warranty coverages purchased by the customer. Contact your Dell sales representative for purchase
options.
Stand
Removing the stand
Prerequisites
Before working inside your computer
.
CAUTION:
When servicing the computer, place it on an elevated, clean, and flat surface. Place the display
flat on the surface with the stand hanging over the edge. It is recommended to remove the stand to avoid
accidental damage to the computer display during servicing.
NOTE:
The following procedure is applicable for both Y stand and Isosceles stand.
NOTE:
For replacement of stand or hinges, the replacement kit is shipped with both stand and hinges, and the service
technician must replace both of these components together. Please refer to the procedure for
and
.
About this task
The following image indicates the location of the stand and provides a visual representation of the removal procedure.
Removing and installing components
13
