Replacing the Processor Fan
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
. After working inside your
computer, follow the instructions in
After Working Inside Your
Computer
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Align the screw holes on the processor fan with the screw holes on the
display-panel base.
2
Adhere the Mylar on the processor fan and the processor heat-sink.
3
Replace the screws that secure the processor fan to the display-panel
base.
4
Connect the processor-fan cable to the system board.
Post-requisites
1
Replace the
VESA-mount bracket
.
2
Replace the
system-board shield
.
3
Replace the
back cover
.
4
Replace the
stand assembly
.
82
Summary of Contents for Inspiron 23
