Removing the Processor
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
. After working inside your
computer, follow the instructions in
After Working Inside Your
Computer
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1
Remove the
stand assembly
.
2
Remove the
back cover
.
3
Remove the
system-board shield
.
4
Remove the
processor heat-sink
.
5
Remove the
processor fan
.
Procedure
1
Press the release lever down on the processor cover and then pull it
outwards to release it from the tab that secures it.
2
Extend the release lever completely to open the processor cover.
83
Summary of Contents for Inspiron 23
