Replacing the VESA-Mount
Bracket
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
. After working inside your
computer, follow the instructions in
After Working Inside Your
Computer
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Align the screw holes on the VESA-mount bracket with the screw holes
on the display-panel base.
2
Replace the screws that secure the VESA-mount bracket to the display-
panel base.
Post-requisites
1
Replace the
system-board shield
.
2
Replace the
back cover
.
3
Replace the
stand assembly
.
42
Summary of Contents for Inspiron 23
