Replacing the Stand Assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
. After working inside your
computer, follow the instructions in
After Working Inside Your
Computer
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Slide the tabs on the stand assembly into the slots on the back cover.
2
Lower the stand assembly to lock it into place.
If you have removed the stand base from the stand riser, follow the steps
below:
3
Align the captive thumbscrew on the stand base with the screw hole on
the stand riser and tighten it.
4
Fold the screw handle on the stand base.
20
Summary of Contents for Inspiron 23
