Replacing the Display
Assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
. After working inside your
computer, follow the instructions in
After Working Inside Your
Computer
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Place the display panel on a flat and clean surface.
2
Align the screw holes on the display-panel brackets with the screw holes
on the display panel.
3
Replace the screws that secure display-panel brackets to the display
panel.
4
Align the screw holes on the display-panel brackets with the screw holes
on the display bezel and adhere the display panel to the display bezel.
NOTE: Make sure that no cables are under the display panel.
5
Replace the screws that secure the display-panel brackets to the display
bezel.
6
Connect the display cable and secure the cable with the tapes.
7
Connect the display-backlight cable to the display panel.
8
Adhere the Aluminium foil tapes to the antenna modules.
9
Adhere the Aluminium foil tape to the antenna cable.
10
Adhere the Aluminium foil tape to the antenna cable and camera and
control-buttons board cable.
Post-requisites
1
Follow the instructions from step 8 to step 13 in “Replacing the
System
Board
”.
2
Replace the
speakers
.
3
Follow the instructions from step 3 to step 5 in “Replacing the
Back
Cover
”.
58
