Replacing the Power-Status
Light Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
. After working inside your
computer, follow the instructions in
After Working Inside Your
Computer
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Slide the power status-light board into the alignment post on the display
bezel.
2
Align the screw holes on the power status-light board with the screw
holes on the display bezel.
3
Replace the screws that secure the power status-light board to the
display bezel.
4
Slide the power-status light cable into the power-status light board
connector and press down on the connector latch to secure the cable.
Post-requisites
Follow the instructions from step 3 to step 5 in “Replacing the
Back Cover
”.
33
