Replacing the Speakers
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
. After working inside your
computer, follow the instructions in
After Working Inside Your
Computer
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Align the screw holes on the speakers with the screw holes on the display
bezel.
2
Replace the screws that secure the speakers to the display bezel.
3
Route the speaker cable on the display bezel and secure it with the tape.
4
Connect the speaker cable to the system board.
5
Slide the power-status light cable into the power-status light board
connector and press down on the connector latch to secure the cable.
6
Adhere the power-status light cable to the speaker.
Post-requisites
Follow the instructions from step 3 to step 5 in “Replacing the
Back Cover
”.
36
