Dell Inspiron 15-7558 Service Manual Download

Page: 64 / 85

Removing the display assembly

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in

Before

working inside your computer

. After working inside your computer, follow

the instructions in

After working inside your computer

. For more safety best

practices, see the Regulatory Compliance home page at

www.dell.com/

regulatory_compliance

Prerequisites

Procedure

Disconnect the antenna cables from the wireless card.

Peel off the tape that secures the antenna cables to the display hinge.

Remove the antenna cables from the routing guides on the computer base.

Remove the screws that secure the display-cable bracket to the system board.

Lift the display-cable bracket off the system board.

Using the pull tab, disconnect the display cable from the system board.

Peel off the tape that secures the Windows-button board cable to the system
board.

Lift the latch and disconnect the Windows-button board cable from the system
board.

Summary of Contents for Inspiron 15-7558






















































































Search results

Summary of Contents for Inspiron 15-7558

Reviews:

Related manuals for Inspiron 15-7558

Brands by name

Popular brands

Dell Inspiron 15-7558, Service Manual

Search results

Summary of Contents for Inspiron 15-7558

Reviews:

Related manuals for Inspiron 15-7558

Brands by name

Popular brands