Dell Inspiron 15-7558, Service Manual

Page: 60 / 85

Replacing the power and volume-
buttons board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before
working inside your computer . After working inside your computer, follow
the instructions in After working inside your computer . For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance .
Procedure
1 Slide the power and volume-buttons board into the slot on the computer base
and snap the power and volume-buttons board into place.
2 Adhere the tape that secures the power and volume-buttons board to the
computer base.
3 Route the power and volume-buttons board cable through the routing guide on
the computer base.
4 Connect the power and volume-buttons board cable to the I/O board.
5 Adhere the tape that secures the power and volume-buttons board cable to the
computer base.
Post-requisites
1 Follow the procedure from step 4 to step 7 in “ Replacing the hard drive ”.
2 Replace the battery .
3 Replace the base cover .
60