Replacing the hard drive
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
. After working inside your computer, follow
the instructions in
After working inside your computer
. For more safety best
practices, see the Regulatory Compliance home page at
CAUTION: Hard drives are fragile. Exercise care when handling the hard
drive.
Procedure
1
Align the screw holes on the hard-drive bracket with the screw holes on the
hard drive.
2
Replace the screws that secure the hard-drive bracket to the hard drive.
3
Connect the interposer to the hard-drive assembly.
4
Align the screw holes on the hard-drive assembly with the screw holes on the
computer base.
5
Replace the screws that secure the hard-drive assembly to the computer base.
6
Connect the hard-drive cable to the system board.
7
Adhere the tape that secures the hard-drive cable to the computer base.
Post-requisites
1
Replace the
2
Replace the
25
Summary of Contents for Inspiron 15-7558
