Replacing the Camera
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
computer, follow the instructions in
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Connect the camera cable to the camera.
2
Adhere the tape that secures the camera cable to the camera.
3
Turn the camera over and using the alignment post, place the camera on
the display back-cover.
4
Adhere the camera cable to the display back-cover.
Post-requisites
1
2
.
3
4
.
5
.
6
7
.
8
.
84
Summary of Contents for Inspiron 14 7000 Series
