background image

Replacing the Hard Drive

WARNING: Before working inside your computer, read the safety 
information that shipped with your computer and follow the steps in 

Before Working Inside Your Computer

. After working inside your 

computer, follow the instructions in 

After Working Inside Your 

Computer

. For more safety best practices, see the Regulatory 

Compliance home page at dell.com/regulatory_compliance. 

CAUTION: Hard drives are fragile. Exercise care when handling the 
hard drive.

Procedure

Connect the interposer to the hard drive.

Align the screw holes on the hard drive-bracket with the screw holes on 

the hard drive.

Replace the screws that secure the hard-drive bracket to the hard drive.

Place the hard-drive assembly into the hard-drive bay.

Align the screw holes on the hard-drive assembly with the screw holes 
on the computer base.

Replace the screws that secure the hard-drive assembly to the computer 

base.

Connect the hard-drive cable to the system board.

Post-requisites

Replace the 

base cover

.

Replace the 

battery

.

29

Summary of Contents for Inspiron 14 7000 Series



























































































Reviews: