Replacing the Keyboard
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
computer, follow the instructions in
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
NOTE: If you are installing a new keyboard, fold the cables the same way
they are folded on the old keyboard. For more information, see “
1
Slide the keyboard cable and the keyboard-backlight cable into the
connectors on the system board and press down on the latches to
secure the cables.
2
Turn the keyboard over.
3
Slide the tabs on the keyboard into the slots on the palm rest and snap
the keyboard into place.
Post-requisites
.
Folding the Keyboard Cables
CAUTION: Do not apply excess pressure while folding the cables.
The cables on the keyboard are not folded when you receive a replacement
keyboard. Follow these instructions to fold the cables on the replacement
keyboard the same way they are folded on the old keyboard.
33
Summary of Contents for Inspiron 14 7000 Series
