manualshive.com logo in svg

Dell Inspiron 14 7000 Series, Service Manual, Page: 61 / 90

Share
Download
Dell Inspiron 14 7000 Series Service Manual Download Page 61

Removing the Heat Sink

WARNING: Before working inside your computer, read the safety 
information that shipped with your computer and follow the steps in 

Before Working Inside Your Computer

. After working inside your 

computer, follow the instructions in 

After Working Inside Your 

Computer

. For more safety best practices, see the Regulatory 

Compliance home page at dell.com/regulatory_compliance. 

WARNING: The heat sink may become hot during normal operation. 
Allow sufficient time for the heat sink to cool before you touch it.

CAUTION: To ensure maximum cooling for the processor, do not 

touch the heat transfer areas on the heat sink. The oils in your skin can 

reduce the heat transfer capability of the thermal grease.

Prerequisites

1 

Remove the 

battery

.

2 

Remove the 

base cover

.

3 

Remove the 

optical drive

.

4 

Remove the 

keyboard

.

5 

Remove the 

palm rest

.

6 

Remove the 

fan

.

7 

Remove the 

system board

.

Procedure

NOTE: The appearance of the heat sink on your computer may differ 

from the image shown in this chapter.

1 

Turn the system board over and place it on a flat surface.

2 

In sequential order (indicated on the heat-sink), loosen the captive 

screws that secure the heat sink to the system board.

61

Summary of Contents for Inspiron 14 7000 Series



























































































Reviews:

No comments