Dell Inspiron 14 7000 Series, Service Manual

Page: 70 / 90

Replacing the Display
Assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer . After working inside your
computer, follow the instructions in After Working Inside Your
Computer . For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Place the display assembly on the computer base and align the screw
holes on the display assembly with the screw holes on the computer
base.
2 Replace the screws that secure the display assembly to the computer
base.
3 Route the I/O-board cable through the routing guides on the computer
base.
4 Connect the I/O-board cable to the I/O board.
5 Route the antenna cables through the routing guides on the computer
base.
6 Adhere the tape securing the antenna cables to the speaker.
7 Connect the antenna cables to the wireless card.
8 Route the display cable through the routing guides on the computer
base.
9 Connect the display cable to the system board and adhere the tape.
Post-requisites
1 Replace the palm rest .
2 Replace the keyboard .
3 Replace the optical drive .
4 Replace the base cover .
5 Replace the battery .
70