Dell Inspiron 1300 Service Manual Download

Page: 9 / 44

Back to Contents Page

Flashing the BIOS

Dell™ Inspiron™ 1300/B120/B130 Service Manual

Flashing the BIOS From a CD

Flashing the BIOS From the Hard Drive

If a BIOS-update program CD is provided with the new system board

, flash the BIOS from the CD.

If you do not have a BIOS-update program CD

, flash the BIOS from

the hard drive.

Flashing the BIOS From a CD

Ensure that the AC adapter is plugged in and that the main battery is installed properly.

Insert the BIOS-update program CD, and restart the computer.

Follow the instructions that appear on the screen. The computer continues to boot and updates the new BIOS. When the flash update is complete, the
computer will automatically reboot.

Press <F2> during POST to enter the system setup program.

Press <Alt> and <F> to reset the computer defaults.

Press <Esc>, select

Save changes and reboot

, and press <Enter> to save configuration changes.

Remove the flash BIOS-update program CD from the drive and restart the computer.

Flashing the BIOS From the Hard Drive

Ensure that the AC adapter is plugged in, the main battery is properly installed, and a network cable is attached.

Turn on the computer.

Locate the latest BIOS update file for your computer at

support.dell.com

Click

Download Now

to download the file.

If the

Export Compliance Disclaimer

window appears, click

Yes, I Accept this Agreement

The

File Download

window appears.

Click

Save this program to disk

and then click

The

Save In

window appears.

Click the down arrow to view the

Save In

menu, select

Desktop

, and then click

Save

The file downloads to your desktop.

Click

Close

if the

Download Complete

window appears.

The file icon appears on your desktop and is titled the same as the downloaded BIOS update file.

Double-click the file icon on the desktop and follow the instructions on the screen.

Back to Contents Page

NOTE:

If you use a BIOS-update program CD to flash the BIOS, set up the computer to boot from a CD before inserting the CD.

Summary of Contents for Inspiron 1300













































Search results

Summary of Contents for Inspiron 1300

Reviews:

Related manuals for Inspiron 1300

Brands by name

Popular brands

Dell Inspiron 1300, Service Manual

Search results

Summary of Contents for Inspiron 1300

Reviews:

Related manuals for Inspiron 1300

Brands by name

Popular brands