Dell Inspiron 1012 Service Manual Download Page 17

Page: 17 / 56

Follow the procedures in

Before You Begin

Place the display assembly in position and replace the screw that secures the display assembly to the computer base.

Replace the display cable grounding screw.

Route the Mini-Card antenna cables through the routing guides on the computer base.

Connect the display cable to the connector on the system board.

Connect the antenna cables to the Mini-Card (see

Replacing the Mini-Card(s)

Replace the screw that secures the display assembly to the computer base.

Replace the hinge cover (see

Replacing the Hinge Cover

Replace the palm rest assembly (see

Replacing the Palm Rest Assembly

10.

Replace the hard-drive assembly (see

Replacing the Hard-Drive Assembly

11.

Replace the keyboard (see

Replacing the Keyboard

12.

Replace the battery (see

Replacing the Battery

Display Bezel

Removing the Display Bezel

Follow the procedures in

Before You Begin

Remove the display assembly (see

Removing the Display Assembly

Remove the two rubber pads that cover the screws that secure the display bezel to the display cover.

Remove the two screws that secure the display bezel to the display assembly.

Using your fingertips, carefully pry up the inside edge of the display bezel.

CAUTION:

Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may

result in damage to the computer.

CAUTION:

The display bezel is extremely fragile. Be careful when removing it to prevent damaging the bezel.

screws (2)

rubber pads (2)

display bezel

Summary of Contents for Inspiron 1012

























































Search results

Summary of Contents for Inspiron 1012

Reviews:

Related manuals for Inspiron 1012

Brands by name

Popular brands

Dell Inspiron 1012, Service Manual

Search results

Summary of Contents for Inspiron 1012

Reviews:

Related manuals for Inspiron 1012

Brands by name

Popular brands